Aesthetically designed to compliment any decor, the Reliable Controls® SMART-Sensor™ EnOcean Accesspoint (SSEA) opens the door to EnOcean® wireless integration with the MACH-System™.

EnOcean Enabled

  • Repeater, software configurable
  • Compatible with EnOcean equipment (EEP) 4BS*, 1BS and RPS
  • EnOcean is the wireless standard for sustainable buildings

Repeater

  • Repeater function soft selectable

SMART-Net

  • Communicates with all Reliable Controls® products using SMART-Net port***
  • Max. of 8 SSEAs per SMART-Net
  • Occupies two traditional SMART-Sensor addresses

Aesthetic Design

  • Smooth contoured lines
  • Slim profile

** For a full list of supported EEPs refer to the submittal
*** Transmit functionality only available on MACH-Pro series product

Programming

  • Dedicated temperature and setpoint objects
  • 18 user-programmable points from EnOcean devices (some sensors take multiple points)
  • Learn button scans all EnOcean devices within range
  • LED status for learned devices

Connection and Addressing

  • Configure network address of SSEA using DIP switches
  • Valid addresses are 1–16
  • Easy 4-wire connection (screwless spring loaded)
  • Recommended wire is 24 AWG solid core only Cat3, Cat5, 6, 6E, or equivalent

Signal Strength Mode

  • Indicates received signal strength in software

Warranty

  • 5 years

Certification

  • FCC CFR 47 Part 15 Class B

Supply Voltage (from controller)

  • SSL – 5 VDC @ 35 mA

Transceiver

  • Frequency: 315 MHz or 902 MHz
  • Data rate/Modulation type: 125 kbps/ASK (902 MHz is FSK)
  • Receiver sensitivity (@ 25 ºC): -98 dBm
  • Conducted output power: typ. 7.5 dBm
  • Radio regulations:
    • R&TTE EN 300 220 (STM 300)
    • FCC CFR-47 Part 15 (TCM 300C)

Transmission Range

  • 30 m (100 ft.) line of sight

Temperature Specifications

  • 10-bit linear active thermistor
  • Range: -8 ºC to 39 ºC (18 ºF to 102 ºF)
  • ± 0.05 ºC (0.09 ºF) resolution
  • User calibrated to ± 0.1 ºC (0.18 ºF) accuracy

Button

  • Standard silicon rubber override button
  • Red and green LEDs mounted in the button for programming status and feedback

Piezo Buzzer

  • 2 kHz buzzer for programming status

Dimensions

  • 12 cm L x 7 cm W x 2.4 cm H (4 3/4″ L x 2 3/4″ W x 15/16″ H)

Weight

  • 0.09 kg (0.195 lb.)

Ambient Limits

  • Operating: -8 ºC to 39 ºC (18 ºF to 102 ºF)
  • Shipping: -40 ºC to 60 ºC (-40 ºF to 140 ºF)
  • Humidity: 10% to 90% RH non-condensing