Catalog Sheet
The SETUP-Tool™ is a powerful, microcomputer-based interface required to configure the MACH-Air™ and the MACH-Zone™.
Pre-Assigned Button Functions
- Address – Used to set address number of panel
- Baud – Used to set network baud rates toggle bauds with up down arrow buttons
- Subnet – Used to toggle between subnet or main-net
- Last – Sets panel to last panel on network
- BACnet – Use to toggle between BACnet or Reliable Controls protocol
- Update – Sends configuration to panel
Mode Button
- Switches between flow and MSET functions
- Uses six wire quick connector RJ-11 cable
Self Powered
- The SETUP-Tool™ is powered from the connected controller
Configuration
- Allows panel configuration without a PC connection
- Valid addresses 1 through 16
Warranty
- Industry Recognized 5 Year
Supply Voltage (from controller)
- SSL – 5 VDC @ 5 mA
- SSL-IO – 5 VDC @ 15 mA
Display
- Four 0.6″ digits, Six 0.3″ characters
- Six icons: Auto, Manual, Cool, Heat, Fan, and Fan-Speed
- Display area 36mm x 36mm (1.4″ x 1.4″)
Temperature Range
- 0 ºC to 40 ºC (32 ºF to 104 ºF)
Temperature Specifications
- 12-bit A/D Converter
- 0.1 ºC (0.18 ºF) resolution
- 1.0 ºC (1.8ºF) accuracy for 10 ºC to 35 ºC (50 ºF to 95 ºF)
Humidity Range (for H models)
- 10-90% range 0.1% resolution
- ± 1.8% RH accuracy
- replaceable sensing element
Buttons
- 3 custom silicon rubber buttons
- Button functions: select, plus, and minus
Inputs
- Dedicated temperature sensor
- 2 thermistor or dry contact (on I/O models)
Outputs
- 2 digital triac (on I/O models)
- 24 VAC @ 0.5 A
SMART-Network
- 16 SMART-Sensors per MACH-Global™ and MACH2™
- 8 SMART-Sensors per MACH1™
- 4 SMART-Sensors per MACH-Zone™, MACH-Air™ and MACH-Vision™
Dimensions
- 12 cm L x 7.0 cm W x 2.25 cm H (4.72″ L x 2.75″ W x 0.89″ H)
Weight
- 0.09 kg (0.195 lb.)
Ambient Limits
- Operating: 0 ºC to 40 ºC (32 ºF to 104 ºF)
- Shipping: -40 ºC to 60 ºC (-40 ºF to 140 ºF)
- Humidity: 10% to 90% RH non-condensing